How does it work?
With the use of Misting SA’s series of speciality MIST nozzles placed in a specified area, or by using specially designed misting rings, attached to box / oscillating fans. When connected to a high pressure MISTING system pump, water is forced through the specialty nozzles and quickly atomized to droplets as small as (5 microns).
MISTING systems will produce billions of tiny droplets every second. If these droplets are introduced into an outdoor area, they quickly evaporate. This process of evaporation requires energy to be completed. The energy is taken from the air in the form of heat. The result is a temperature reduction of up to 12 degrees, depending on the ambient temperature and the relative HUMIDITY of the air. This method of temperature reduction is the most common use for all misting systems.
When MISTING systems are placed inside an enclosed area (such as a greenhouse), the billions of droplets that are produced will initially provide cooling as the droplets evaporate. However, if the air exchange is limited, the MISTING system will continue to increase the humidity level within the structure. Humidity levels as high as 90+% are possible. This unique characteristic of all MISTING systems makes them ideal for both outdoor cooling and humidification.
What components are needed for a misting system?
The required components for a misting system includes
Misting SA High pressure tubing (Nylon, Stainless steel or Copper)
Misting SA misting nozzles
Misting SA misting spray body
Misting SA Filtration Housing and cartridge
Misting SA Pressure Switch
Misting SA Solenoid Valves (low and high pressure)
Misting SA Anti drip valve
Misting SA high pressure misting pumps (various flow rates)
Misting SA Humidity and temperature controllers * Optional
Misting SA ventilation equipment. * Optional
* Additional components (such as wall mounted fans, extractor fans, Humidity and Temperature controllers) may be required for custom designed solutions.
Misting SA High pressure tubing (Nylon, Stainless steel or Copper)
Misting SA misting nozzles
Misting SA misting spray body
Misting SA Filtration Housing and cartridge
Misting SA Pressure Switch
Misting SA Solenoid Valves (low and high pressure)
Misting SA Anti drip valve
Misting SA high pressure misting pumps (various flow rates)
Misting SA Humidity and temperature controllers * Optional
Misting SA ventilation equipment. * Optional
* Additional components (such as wall mounted fans, extractor fans, Humidity and Temperature controllers) may be required for custom designed solutions.
No comments:
Post a Comment